Cisco 200-105 Dumps Free Demo Download

DumpsSchool 200-125 exam dumps are for aspiring candidates who want maximum knowledge and skills about Cisco networking, LAN switching technologies, IPv4 and IPv6 routing technologies to pass the 200-125 exam in the first attempt.

Try it Latest DumpsSchool 200-105 Exam dumps. Buy Full File here: https://www.dumpsschool.com/200-105-exam-dumps.html (691 As Dumps)

Download the DumpsSchool 200-105 braindumps from Google Drive: https://drive.google.com/file/d/1TwCxP9R2WPXn5O77CUBND73niqczpZDp/view (FREE VERSION!!!)

Question No. 1

Which identification number is valid for an extended ACL?

Answer: D

Question No. 2

How can you manually configure a switch so that it is selected as the root Switch?

Answer: C

Question No. 3

A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing

departmental traffic.

What is the effect of adding switch ports to a new VLAN on the switch?

Answer: D

Question No. 4

Which three are the components of SNMP? (Choose three.)

Answer: A, B, D

Question No. 5

Which version of SNMP first allowed user-based access?

Answer: B

Question No. 6

What is the default DTP mode on a switch port?

Answer: B

Question No. 7

Which two types of cloud services may require you to alter the design of your network infrastructure? (Choose

two.)

Answer: B, C

Question No. 8

A department decides to replace its hub with a Catalyst 2950 switch that is no longer needed by another

department. To prepare the switch for installation, the network administrator has erased the startup

configuration and reloaded the switch. However, PCs that are connected to the switch experience various

connectivity problems.

What is a possible cause of the problem?

Answer: A

Question No. 9

Which purpose of the network command in the BGP configuration of a router is true?

Answer: B

Question No. 10

What can be done to Frame Relay to resolve split-horizon issues?(Choose two.)

Answer: B, D

IP split horizon checking is disabled by default for Frame Relay encapsulation to allow routing updates to go in and out of the same interface. An exception is the Enhanced Interior Gateway Routing Protocol (EIGRP) for which split horizon must be explicitly disabled.

Certain protocols such as AppleTalk, transparent bridging, and Internetwork Packet Exchange (IPX) cannot be supported on partially meshed networks because they require split horizon to be enabled (a packet received on an interface cannot be transmitted over the same interface, even if the packet is received and transmitted on different virtual circuits).

Configuring Frame Relay subinterfaces ensures that a single physical interface is treated as multiple virtual interfaces. This capability allows you to overcome split horizon rules so packets received on one virtual interface can be forwarded to another virtual interface, even if they are configured on the same physical interface.

Question No. 11

After you configure a new IP SLA, you notice that it is failing to run or generate statistics. Which step do you

take first to identify the problem?

Answer: D

Question No. 12

An access list has been designed to prevent Telnet traffic from the Graphics Department from reaching the HR server attached to the Eastfield router but allow Telnet traffic to other destinations. Given the following access

list:

access-list 101 deny tcp any any eq 23

permit ip any any

On which router, interface, and in what direction should the access list be placed to most efficiently implement

this list? (Choose three.)

Answer: B, C, F

Question No. 13

SIMULATION

Lab Simulation Question: 300

CCNA.com has a small network that is using EIGRP as its IGP. All routers should be running an EIGRP AS

number 12. Router MGT is also running static routing to the ISP.

CCNA.com has recently adding the ENG router. Currently, the ENG router does not have connectivity to the

ISP router. All other interconnectivity and Internet access for the existing locations of the company are working

properly.

The task is to identify the fault(s) and correct the router configuration(s) to provide full connectivity between

the routers.

Access to the router CLI can be gained by clicking on the appropriate host.

All passwords on all routers are cisco.

IP addresses are listed in the chart below.

MGT

Fa0/0-192.168.77.33

S1/0-198.0.18.6

S0/0-192.168.27.9

S0/1-192.168.50.21

ENG

Fa0/0-192.168.77.34

Fa1/0-192.168.12.17

Fa0/1-192.168.12.1

Parts1

Fa0/0-192.168.12.33

Fa0/1-192.168.12.49

S0/0-192.168.27.10

Parts2

Fa0/0-192.168.12.65

Fa0/1-192.168.12.81

S0/1-192.168.50.22

Answer: A

200-105 Dumps Google Drive: (Limited Version!!!)
https://drive.google.com/file/d/1TwCxP9R2WPXn5O77CUBND73niqczpZDp/view

Related Certification: CCNA Routing & Switching dumps